The compact oxy.IQ, with its built-in microprocessor, is designed to easily fit into any installation site, whether general purpose or hazardous area. With two-wire loop power, it can be installed right at the sampling point instead of having to be rack or panel mounted. The intuitive interface means you can program oxygen analysis on the keypad and display. From selecting and programming desired ranges to performing sensor diagnostics and setting low-reading alarms, this fuel oxygen cell analyzer is smart enough to tell you exactly what you want to know.

XMTC Thermal Conductivity Transmitter is suitable for thermal conductivity analysis of hydrogen and other gases.

The dew.IQ single-channel hygrometer combines our technologically advanced M Series moisture probe with state-of-the-art electronics for superior speed of response, stability and overall performance. When combined with the new IQ.probe, swapping out moisture probes in the field takes seconds - no required programming. Measurement range is form ambient to ppb moisture concentrations in a wide variety of gases. The dew.IQ is available in a 9 ½ inch rack, bench, panel and wall-mount weatherproof packages..

It measures % oxygen in a sample gas. It has a three digit display, 12 mm high and with 0.1 % steps. Sample gases are easily educted by the inbuilt pump. Rechargeable Ni/Cd batteries power the instrument. The instrument is supplied with a filter tube, a separate probe and battery-charger. It has a wide variety of applications

PPM O2 sensor is ideal for measuring oxygen 0-10 PPM in a gas mixture. This innovative sensor design carries over many of the features of the traditional galvanic oxygen sensor but poses much higher sensitivity, stability and high signal to noise ratio with 24 months operating life thus offerring effective analyzer solution for measuring low levels PPM oxygen analysis

Mecburg Engineering & Consultancy offers an extensive line of quality engineered precision electrochemical fuel cell oxygen sensors. These sensors are offered in a wide range of configurations with analysis ranges from 1 PPM up to 100% oxygen. Backed with excellent customer service and an industry proven product design, our sensors are found in a number of applications throughout the world including air separation plants, chemical & petrochemical processes, steel production and many others. For pricing and availability, please contact our customer service representative. For a cross reference equivalent to competitive sensors.

A carbon monoxide detector or CO detector is a device that detects the presence of the carbon monoxide (CO) gas in order to prevent carbon monoxide poisoning.

A flame detector is a sensor designed to detect and respond to the presence of a flame or fire, allowing flame detection. Responses to a detected flame depend on the installation, but can include sounding an alarm, deactivating a fuel line (such as a propane or a natural gas line), and activating a fire suppression system.

A carbon dioxide sensor or CO2 sensor is an instrument for the measurement of carbon dioxide gas. The most common principles for CO2 sensors are infrared gas sensors (NDIR) and chemical gas sensors.

The GE Panametrics Moisture Target Series 6 is a single-channel analyzer that measures moisture in compressed air and gases. Designed for permanent installations the MTS6 can significantly enhance the performance of OEM products by allowing closed-loop control of moisture. It is used in conjunction with M Series moisture probe or VeriDri moisture transmitter for air/gas dryer original equipment. The microprocessor-based MTS6 accurately tracks fast-changing process conditions and displays dew/frost point temperature in °F or °C on an LCD. Dew/frost point is also available as an analog voltage or current output, and the Moisture Target Series 6 features built-in isolation to ensure the integrity of signals to remote devices. The unit also features two Form C alarm relays for high and low dew/frost point limits. The microprocessor-based electronics and six-button keypad combine to make selection of analog output zero and span, alarm set points fast and easy, and entry of calibration data sample. The panel-mount MTS6 comes in a compact DIN standard meter housing for applications where space is at a premium. The case slides directly into the panel cutout, and is held in place from the rear by captive screws..

A pressure transmitter or pressure sensor is a device that measures pressure in a liquid, fluid, or gas. Pressure transmitters are commonly used to measure pressure inside of industrial machinery in order to alert the user before a catastrophe occurs.